中文 / EN

Shenzhen Guodian Xuzhen Electric Technology Co., Ltd.

Product

product demand

We can customize according to your needs, please fill in the form below.

Why Customize?

You only need to fill in your needs, purposes, we will provide personalized customization.

contact us

You can also contact us in the following ways

support hotline:
TEL:400-698-3738
Shenzhen Guodian Xuzhen Electric Technology Co., Ltd. Address:
龙岗区龙城街道五联瓦窑东路26号安能泰工业园
中文 / EN
All products :
Microcomputer intelligent quasi-synchronized splitter
产品型号： PFX-1

The splitter is mainly designed to cooperate with the PTQ2000C synchronous controller. When used together, it can connect 8 synchronous points to the grid, which can greatly reduce the cost of large power plants. It is suitable for the integration of host control equipment manufacturers and automati...

sales network
Please select the address closest to you, and we will find the nearest dealer for you to serve you!
Province
Inquire
Features
◆You can select different channels and connect the relevant signal paths by on-site operation. When the channel is selected, the corresponding channel light flashes, and the corresponding channel light is always on after the synchronization is successfully closed.
◆It can receive remote operation to select different channels and connect related signal paths for synchronous operation.
◆It can receive commands from the host computer to select different channels and connect the relevant signal paths for synchronous operation.
◆When necessary, you can use the "Approval" key (on-site or remote) to issue a "no pressure closing" command or a "closing approval" command.
◆You can use the "Abort" key to urgently abort (on-site or remote) ongoing synchronization operations.
◆This device can open or close any channel on site (with key switch) (including closed channel, closing the closed channel can prevent misoperation).
◆It has the function of networking and communication with the host computer, and realizes the remote control of the computer.
technical parameter
◆Power:   AC85V～250V  DC100V～250V
◆Input PT signal:
Standard voltage of generator (to be paralleled): 0V～100V+30V
Grid (system side) standard voltage:  0V～100V+30V
◆Input synchronous feedback signal: closing auxiliary normally open contact signal.
◆Output signal: splitter ready, splitter fault contact capacity is AC resistive 220V/5A; AC resistive 380V/2A; DC 110V/0.8A, DC 220V/0.2A.
◆The contact capacity of each channel selector switch: same as above.
◆For other conditions, please refer to the industry standard of the former Ministry of Machinery Industry JB/T 3950-1999 "Automatic quasi-synchronization device".
◆ Dimensions
Case size: H×W×D=120×400×300 mm
Aperture size: H×W=122×402 mm
Panel height×width=140×420 mm
Mounting holes: Φ4    Hole spacing: 160 mm
Mounting hole to panel distance: 310 mm
Case show
  • Automatic power generation control system for hydropower station
    enlarge

    Automatic power generation control system for hydropower station

  • Automatic power generation control system for hydropower station
    enlarge

    Automatic power generation control system for hydropower station

  • Automatic power generation control system for hydropower station
    enlarge

    Automatic power generation control system for hydropower station

123456